POSITAL's OPTOCODE encoders with interfaces for EtherNet/IP and PROFINET IRT networks are ideal for sophisticated motion control such as packaging lines, cartoning machines or anywhere else accuracy, precision and reliability are needed.
Both encoder types can be used in high-speed machines: the EtherNet/IP models, which incorporate an Ertec200 controller, have cycle times of less than 10 ms, while the PROFINET IRT models support cycle times as low as 1 ms (isochronos real-time) and 10 ms (real-time). With a diameter of only 58 mm (2.3”) and a maximum length of 80mm (3.1”), these units are easy to install in tight spaces.
Connections are straightforward. The EtherNet/IP models feature a built-in Ethernet switch, while the PROFINET version is connected without the need for terminating resistors or switches for address allocation or Baud rate setting. Both models use industry-standard M12 connectors for data communications and power supply. Like all OPTOCODE encoders, they use a proven opto-electronic sensor to determine absolute position values. Angular resolution is 65,536 steps per revolution (16 bits), while up to 16,384 revolutions (14 bits) can be registered in multi-turn mode. All OPTOCODE encoders instantly provide current absolute position values without referencing, even after power failure. No backup batteries needed! POSITAL, which has been developing and manufacturing Ethernet encoders since 2001, has received certifications for the EtherNet/IP and PROFINET IRT encoders from the Open DeviceNet Vendors Association (ODVA) and the PROFIBUS User Organization (PNO) respectively.
About FRABA and POSITAL
FRABA Inc. is the North American sister company of Germany-based FRABA AG, a group of enterprises focused on providing advanced products for position sensing and motion control in many sectors and applications. Business units within the FRABA group include POSITAL (rotary encoders and inclinometers), VITECTOR (safety assurance equipment), and INTACTON (optical motion sensors).
Source: automation.com
- 30/08/2010 23:00 - B&B introduces Zlinx Xtreme Wireless I/O Modules
- 30/08/2010 22:59 - Siemens upgrades Sinamics S120 CU320-2 drive control unit
- 30/08/2010 22:52 - ASI announces Stainless Steel Cable Glands
- 30/08/2010 22:50 - Display Solution introduces a wide screen display
- 30/08/2010 22:48 - Rockwell Automation introduces PlantPAx Logix Batch software
- 24/08/2010 12:12 - Emerson enhances Ovation expert control system
- 24/08/2010 12:07 - Advantech releases Two Rugged Touch Panel PCs
- 24/08/2010 11:54 - Bud Industries Introduces SNB Stainless-Steel NEMA Box
- 20/08/2010 11:51 - Endress+Hauser Announces Water Sampling Solutions
- 20/08/2010 11:49 - Emerson announces Shafer SH Series gas-over-oil actuator
